|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
BCcomponents www..com DATA SHEET MKT 368/369 Metallized polyester film capacitors Maintenance type Supersedes data of April 1999 File under BCcomponents, BC05 2000 Feb 01 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT RADIAL EPOXY LACQUERED TYPE MKT 368/369 PITCH 10/15/22.5/27.5 mm 296x12(full_width) CBA924 Fig.1 Simplified outlines. FEATURES * Low-inductive wound cell of metallized (PETP) film * Cell protected by epoxy lacquer * Radial leads of solder-coated wire * Resistant to solvents and rinsing liquids. APPLICATIONS * Blocking and coupling * Bypass and energy reservoir. DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-02/101". QUICK REFERENCE DATA DESCRIPTION Capacitance range (E12 series) Capacitance tolerance Rated (DC) voltage Climatic category Rated temperature Maximum application temperature Tangent of loss angle at 10 kHz Reference specification Performance grade 10%; 5% 63 V; 100 V; 250 V; 400 V; 630 V 55/100/56 85 C 100 C 100 x 10-4 IEC 60384-2 grade 1 (long life) VALUE 0.001 to 6.8 F 2000 Feb 01 2 BCcomponents Maintenance type www..com Metallized polyester film capacitors COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 10.0 mm 368 15.0 mm 22.5 mm 27.5 mm 369 10.0 mm CAPACITANCE (numerically) MKT 368/369 MULTIPLIER (nF) 0.1 1 10 100 2 3 4 5 Example: 104 = 10 x 10 = 100 nF 2222 36. XX XX X TYPE PACKAGING LEAD CONFIGURATION lead length 4.0 mm C-TOL 10% 5% 10% 5% 10% 5% 10% 5% 10% 5% 10% 5% 10% 5% 63 V 15 16 13 17 11 12 18 19 15 16 11 12 18 19 100 V 25 26 23 27 21 22 28 29 25 26 21 22 28 29 250 V 45 46 43 47 41 42 48 49 45 46 41 42 48 49 400 V 55 56 53 57 51 52 58 59 55 56 51 52 58 59 630 V 65 66 63 67 61 62 68 69 65 66 61 62 68 69 loose in box 368 lead length 3.5 mm long leads taped on reel H = 16.0 mm lead length 4.0 mm loose in box 369 taped on reel lead length 22.0 mm H = 18.5 mm 2000 Feb 01 3 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 368 GENERAL DATA l b MKT 368 PITCH 10 mm 296x12(full_width) h seating plane (1) (2) lt P (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. A Odt CBA070 Fig.3 Outline. Specific reference data for the 63 V DC capacitors DESCRIPTION Tangent of loss angle: 0.1 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for C > 0.33 F at 10 V; 1 minute R between interconnecting leads and casing; 10 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 63 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm lt = 19.0 4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 16.0 mm; note 2 C-tol 10% 5% 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 15... 2222 368 16... 2222 368 13... 2222 368 17... 2222 368 11... 2222 368 12... 2222 368 18... 2222 368 19... ORDERING on request on request on request on request on request on request on request on request VALUE at 1 kHz 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 30 V/s >15000 M >5000 s >30000 M 100 V; 1 minute 200 V; 1 minute at 100 kHz 300 x 10-4 - 2000 Feb 01 4 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 63 V; URac = 40 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1 4.2 x 13.2 x 12.5 4.0 x 12.8 x 12.5 4.3 x 13.1 x 12.5 4.2 x 12.9 x 12.5 4.3 x 13.4 x 12.5 4.7 x 13.7 x 12.5 5.1 x 14.1 x 12.5 5.5 x 14.5 x 12.5 6.0 x 15.0 x 12.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.8 2222 368 15224 2222 368 15274 2222 368 15334 2222 368 15394 2222 368 15474 2222 368 15564 2222 368 15684 2222 368 15824 2222 368 15105 MKT 368 2000 Feb 01 5 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 368 GENERAL DATA MKT 368 PITCH 10/15 mm 296x12(full_width) l b seating plane (1) (2) h lt P (1) Hole 1.0 for dt = 0.6 mm. Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. A Odt CBA071 Fig.4 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 100 V (DC): P = 10 mm P = 15 mm R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 100 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm lt = 19.0 4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 16.0 mm; note 2 C-tol 10% 5% 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 25... 2222 368 26... 2222 368 23... 2222 368 27... 2222 368 21... 2222 368 22... 2222 368 28... 2222 368 29... ORDERING on request on request on request on request on request on request on request on request at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 VALUE at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 28 V/s 20 V/s >15000 M >5000 s >30000 M 160 V; 1 minute 200 V; 1 minute at 100 kHz 225 x 10-4 300 x 10-4 - 2000 Feb 01 6 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 4.0 x 13.0 x 12.5 3.7 x 12.7 x 12.5 4.0 x 13.0 x 12.5 4.3 x 13.3 x 12.5 3.9 x 12.9 x 12.5 4.2 x 13.2 x 12.5 4.5 x 13.6 x 12.5 0.4 0.4 0.4 0.4 0.4 0.5 0.5 2222 368 25563 2222 368 25683 2222 368 25823 2222 368 25104 2222 368 25124 2222 368 25154 2222 368 25184 2222 368 25224 MKT 368 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1 5.5 x 14.5 x 17.5 6.0 x 15.0 x 17.5 6.5 x 15.5 x 17.5 7.5 x 16.5 x 17.5 0.7 0.9 1.0 1.3 5.0 x 14.0 x 17.5 0.6 2222 368 25274 2222 368 25334 2222 368 25394 2222 368 25474 2222 368 25564 2222 368 25684 2222 368 25824 2222 368 25105 2000 Feb 01 7 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 368 GENERAL DATA 296x12(full_width) MKT 368 PITCH 22.5/27.5 mm l b seating plane (1) (2) h lt P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. A Odt CBA071 Fig.5 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION Tangent of loss angle: C > 1.0 F Rated voltage pulse slope (dU/dt)R at 100 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 100 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm long leads; note 2 Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: a) lt = 25.0 4.0 mm for lead pitch 22.5 mm. b) lt = 24.0 4.0 mm for lead pitch 27.5 mm. 3. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 16.0 mm; note 3 C-tol 10% 5% 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 25... 2222 368 26... 2222 368 23... 2222 368 27... 2222 368 21... 2222 368 22... 2222 368 28... 2222 368 29... ORDERING on request on request on request on request on request on request on request on request VALUE at 1 kHz 75 x 10-4 at 10 kHz 150 x 10-4 8 V/s 7 V/s >15000 M >5000 s >30000 M 100 V; 1 minute 200 V; 1 minute 2000 Feb 01 8 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 1.2 1.5 1.8 2.2 2.7 3.3 6.0 x 18.0 x 26.0 7.0 x 19.0 x 26.0 7.5 x 19.5 x 26.0 8.5 x 21.5 x 26.0 9.0 x 22.0 x 26.0 9.0 x 22.0 x 30.0 10.0 x 23.0 x 30.0 11.0 x 24.0 x 30.0 12.0 x 25.0 x 30.0 2.5 3.2 3.5 4.1 4.5 2222 368 25125 2222 368 25155 2222 368 25185 2222 368 25225 2222 368 25275 2222 368 25335 MKT 368 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 3.9 4.7 5.6 6.8 4.8 5.5 6.2 6.8 2222 368 25395 2222 368 25475 2222 368 25565 2222 368 25685 2000 Feb 01 9 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 368 GENERAL DATA MKT 368 PITCH 10/15 mm 296x12(full_width) l b seating plane (1) (2) h lt P (1) Hole 1.0 for dt = 0.6 mm. Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. A Odt CBA071 Fig.6 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.33 F Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 10 mm P = 15 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 250 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm lt = 19.0 4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 16 mm; note 2 C-tol 10% 5% 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 45... 2222 368 46... 2222 368 43... 2222 368 47... 2222 368 41... 2222 368 42... 2222 368 48... 2222 368 49... ORDERING on request on request on request on request on request on request on request on request VALUE at 1 kHz 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 70 V/s 28 V/s >30000 M >10000 s >30000 M 400 V; 1 minute 500 V; 1 minute at 100 kHz 225 x 10-4 300 x 10-4 2000 Feb 01 10 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 4.5 x 13.5 x 12.5 4.6 x 13.5 x 12.5 4.4 x 13.4 x 12.5 4.7 x 13.7 x 12.5 0.5 0.5 0.5 0.5 4.0 x 13.0 x 12.5 0.4 2222 368 45273 2222 368 45333 2222 368 45393 2222 368 45473 2222 368 45563 2222 368 45683 2222 368 45823 2222 368 45104 MKT 368 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.12 0.15 0.18 0.22 0.27 0.33 5.0 x 14.0 x 17.5 5.5 x 14.5 x 17.5 6.0 x 15.0 x 17.5 6.0 x 15.5 x 17.5 6.8 x 16.0 x 17.5 0.6 0.7 0.9 1.0 1.2 2222 368 45124 2222 368 45154 2222 368 45184 2222 368 45224 2222 368 45274 2222 368 45334 2000 Feb 01 11 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 368 GENERAL DATA 296x12(full_width) MKT 368 PITCH 22.5/27.5 mm l b seating plane (1) (2) h lt P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. A Odt CBA071 Fig.7 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: 0.33 F < C 0.47 F 0.47 F < C 1.0 F C > 1.0 F Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 250 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm long leads; note 2 Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: a) lt = 25.0 4.0 mm for lead pitch 22.5 mm. b) lt = 24.0 4.0 mm for lead pitch 27.5 mm. 3. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 16 mm; note 3 C-tol 10% 5% 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 45... 2222 368 46... 2222 368 43... 2222 368 47... 2222 368 41... 2222 368 42... 2222 368 48... 2222 368 49... ORDERING on request on request on request on request on request on request on request on request at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 VALUE at 10 kHz 130 x 10-4 130 x 10-4 150 x 10-4 12 V/s 10 V/s >30000 M >10000 s >30000 M 400 V; 1 minute 500 V; 1 minute at 100 kHz 300 x 10-4 - - 2000 Feb 01 12 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.39 0.47 0.56 0.68 0.82 1 5.0 x 17.0 x 26.0 5.5 x 17.5 x 26.0 6.0 x 18.0 x 26.0 6.6 x 18.5 x 26.0 7.2 x 19.0 x 26.0 8.0 x 20.0 x 26.0 8.0 x 21.0 x 30.0 9.0 x 22.0 x 30.0 10.0 x 23.0 x 30.0 11.0 x 24.0 x 30.0 1.8 2.2 2.5 2.8 3.2 3.8 2222 368 45394 2222 368 45474 2222 368 45564 2222 368 45684 2222 368 45824 2222 368 45105 MKT 368 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 1.2 1.5 1.8 2.2 4.1 4.8 5.5 6.2 2222 368 45125 2222 368 45155 2222 368 45185 2222 368 45225 2000 Feb 01 13 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 368 GENERAL DATA 296x12(full_width) MKT 368 PITCH 10/15 mm l b seating plane (1) (2) h lt P (1) Hole 1.0 for dt = 0.6 mm. Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. A Odt CBA071 Fig.8 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.15 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): P = 10 mm P = 15 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 400 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm lt = 19.0 4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 16 mm; note 2 C-tol 10% 5% 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 55... 2222 368 56... 2222 368 53... 2222 368 57... 2222 368 51... 2222 368 52... 2222 368 58... 2222 368 59... ORDERING on request on request on request on request on request on request on request on request VALUE at 1 kHz 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 110 V/s 44 V/s >30000 M >10000 s >30000 M 640 V; 1 minute 800 V; 1 minute at 100 kHz 225 x 10-4 300 x 10-4 2000 Feb 01 14 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 400 V; URac = 220 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 4.0 x 12.9 x 12.5 4.2 x 13.2 x 12.5 4.6 x 13.7 x 12.5 5.0 x 13.9 x 17.5 5.4 x 14.5 x 17.5 5.0 x 13.7 x 17.5 5.0 x 13.5 x 17.5 4.8 x 14.0 x 17.5 5.3 x 14.5 x 17.5 5.7 x 15.0 x 17.5 6.4 x 15.5 x 17.5 0.5 0.5 0.5 4.0 x 13.0 x 12.5 0.5 4.6 x 13.6 x 12.5 0.5 4.0 x 13.0 x 12.5 4.3 x 13.3 x 12.5 4.6 x 13.6 x 12.5 4.0 x 13.0 x 12.5 4.1 x 13.2 x 12.5 0.5 0.5 0.5 0.5 0.5 4.5 x 13.5 x 12.5 0.5 2222 368 55102 2222 368 55122 2222 368 55152 2222 368 55182 2222 368 55222 2222 368 55272 2222 368 55332 2222 368 55392 2222 368 55472 2222 368 55562 2222 368 55682 2222 368 55822 2222 368 55103 2222 368 55123 2222 368 55153 2222 368 55183 2222 368 55223 2222 368 55273 2222 368 55333 MKT 368 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.6 0.7 0.6 0.6 0.6 0.7 0.9 1.0 2222 368 55393 2222 368 55473 2222 368 55563 2222 368 55683 2222 368 55823 2222 368 55104 2222 368 55124 2222 368 55154 2000 Feb 01 15 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 368 GENERAL DATA 296x12(full_width) MKT 368 PITCH 22.5/27.5 mm l b seating plane (1) (2) h lt P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. A Odt CBA071 Fig.9 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle: 0.15 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 400 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm long leads; note 2 Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: a) lt = 25.0 4.0 mm for lead pitch 22.5 mm. b) lt = 24.0 4.0 mm for lead pitch 27.5 mm. 3. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 16 mm; note 3 C-tol 10% 5% 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 55... 2222 368 56... 2222 368 53... 2222 368 57... 2222 368 51... 2222 368 52... 2222 368 58... 2222 368 59... ORDERING on request on request on request on request on request on request on request on request at 1 kHz 75 x 10-4 75 x 10-4 VALUE at 10 kHz 130 x 10-4 130 x 10-4 20 V/s 16 V/s >30000 M >10000 s >30000 M 640 V; 1 minute 800 V; 1 minute at 100 kHz 300 x 10-4 - 2000 Feb 01 16 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 400 V; URac = 220 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.18 0.22 0.27 0.33 0.39 0.47 5.6 x 17.5 x 26.0 6.3 x 18.5 x 26.0 6.0 x 18.0 x 26.0 6.4 x 18.5 x 26.0 7.1 x 19.0 x 26.0 8.0 x 20.0 x 26.0 7.5 x 20.5 x 30.0 8.5 x 21.5 x 30.0 9.5 x 22.5 x 30.0 10.5 x 23.5 x 30.0 2.2 2.8 2.5 2.8 2.8 3.8 2222 368 55184 2222 368 55224 2222 368 55274 2222 368 55334 2222 368 55394 2222 368 55474 MKT 368 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.56 0.68 0.82 1 3.8 4.5 5.2 5.8 2222 368 55564 2222 368 55684 2222 368 55824 2222 368 55105 2000 Feb 01 17 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 368 GENERAL DATA MKT 368 PITCH 10/15 mm 296x12(full_width) l b seating plane (1) (2) h lt P (1) Hole 1.0 for dt = 0.6 mm. Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. A Odt CBA071 Fig.10 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.068 F Rated voltage pulse slope (dU/dt)R at 630 V (DC): P = 10 mm P = 15 mm R between leads, for C 0.33 F at 500 V; 1 minute RC between leads, for C > 0.33 F at 500 V; 1 minute R between interconnecting leads and casing; 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 630 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm lt = 19.0 4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 16 mm; note 2 C-tol 10% 5% 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 65... 2222 368 66... 2222 368 63... 2222 368 67... 2222 368 61... 2222 368 62... 2222 368 68... 2222 368 69... ORDERING on request on request on request on request on request on request on request on request VALUE at 1 kHz 75 x 10-4 at 10 kHz 130 x 10-4 70 V/s 70 V/s >30000 M >10000 s >30000 M 1008 V; 1 minute 1260 V; 1 minute at 100 kHz 225 x 10-4 2000 Feb 01 18 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.01 0.012 0.015 0.018 0.022 4.3 x 13.1 x 12.5 4.6 x 13.4 x 12.5 4.9 x 13.9 x 12.5 5.3 x 14.3 x 12.5 5.9 x 14.9 x 12.5 5.5 x 14.5 x 17.5 6.0 x 15.0 x 17.5 6.3 x 15.5 x 17.5 7.0 x 16.0 x 17.5 7.5 x 16.5 x 17.5 8.0 x 17.0 x 17.5 0.5 0.5 0.6 0.6 0.8 2222 368 65103 2222 368 65123 2222 368 65153 2222 368 65183 2222 368 65223 MKT 368 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.027 0.033 0.039 0.047 0.056 0.068 0.7 0.9 1.0 1.2 1.3 1.4 2222 368 65273 2222 368 65333 2222 368 65393 2222 368 65473 2222 368 65563 2222 368 65683 2000 Feb 01 19 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 368 GENERAL DATA 296x12(full_width) MKT 368 PITCH 22.5/27.5 mm l b seating plane (1) (2) h lt P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. A Odt CBA071 Fig.11 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle: 0.068 F < C 0.1 F 0.1 F < C 0.47 F Rated voltage pulse slope (dU/dt)R at 630 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 500 V; 1 minute RC between leads, for C > 0.33 F at 500 V; 1 minute R between interconnecting leads and casing; 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 630 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm long leads; note 2 Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: a) lt = 25.0 4.0 mm for lead pitch 22.5 mm. b) lt = 24.0 4.0 mm for lead pitch 27.5 mm. 3. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 16 mm; note 3 C-tol 10% 5% 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 65... 2222 368 66... 2222 368 63... 2222 368 67... 2222 368 61... 2222 368 62... 2222 368 68... 2222 368 69... ORDERING on request on request on request on request on request on request on request on request at 1 kHz 75 x 10-4 75 x 10-4 VALUE at 10 kHz 130 x 10-4 130 x 10-4 28 V/s 24 V/s >30000 M >10000 s >30000 M 1008 V; 1 minute 1260 V; 1 minute at 100 kHz 225 x 10-4 300 x 10-4 2000 Feb 01 20 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.082 0.1 0.12 0.15 0.18 0.22 6.1 x 18.0 x 26.0 7.0 x 19.0 x 26.0 7.2 x 19.5 x 26.0 8.0 x 21.0 x 26.0 9.0 x 22.0 x 26.0 10.0 x 23.0 x 26.0 10.0 x 23.0 x 30.0 11.5 x 24.5 x 30.0 12.5 x 25.5 x 30.0 14.0 x 27.0 x 30.0 2.5 3.2 3.5 3.8 4.5 5.2 2222 368 65823 2222 368 65104 2222 368 65124 2222 368 65154 2222 368 65184 2222 368 65224 MKT 368 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.27 0.33 0.39 0.47 5.5 6.5 7.1 8.2 2222 368 65274 2222 368 65334 2222 368 65394 2222 368 65474 2000 Feb 01 21 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 369 GENERAL DATA l b MKT 369 PITCH 10 mm 296x12(full_width) seating plane (1) h 1.5 lt O1.3 (1) Hole 1.0 for dt = 0.6 mm. P Odt CBA072 Fig.12 Outline. Specific reference data for the 63 V DC capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: 0.1 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for C > 0.33 F at 10 V; 1 minute R between interconnecting leads and casing; 10 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 63 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 18.5 mm; note 2 C-tol 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 369 15... 2222 369 16... 2222 369 11... 2222 369 12... 2222 369 18... 2222 369 19... ORDERING on request on request on request on request on request on request 75 x 10-4 75 x 10-4 130 x 10-4 130 x 10-4 30 V/s >15000 M >5000 s >30000 M 100 V; 1 minute 200 V; 1 minute 300 x 10-4 - at 10 kHz at 100 kHz 2000 Feb 01 22 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 63 V; URac = 40 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1 4.2 x 9.3 x 12.5 3.8 x 9.0 x 12.5 4.1 x 9.3 x 12.5 4.0 x 9.2 x 12.5 4.3 x 9.5 x 12.5 4.7 x 9.8 x 12.5 5.1 x 10.2 x 12.5 5.5 x 10.7 x 12.5 6.0 x 11.1 x 12.5 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.6 0.7 2222 369 15224 2222 369 15274 2222 369 15334 2222 369 15394 2222 369 15474 2222 369 15564 2222 369 15684 2222 369 15824 2222 369 15105 MKT 369 2000 Feb 01 23 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 369 GENERAL DATA MKT 369 PITCH 10 mm 296x12(full_width) l b seating plane (1) h 1.5 lt O1.3 (1) Hole 1.0 for dt = 0.6 mm. P Odt CBA072 Fig.13 Outline. Specific reference data for the 100 V DC capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: C 0.1 F C 0.1 F Rated voltage pulse slope (dU/dt)R at 100 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 100 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 18.5 mm; note 2 C-tol 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 369 25... 2222 369 26... 2222 369 21... 2222 369 22... 2222 369 28... 2222 369 29... ORDERING on request on request on request on request on request on request 75 x 10-4 75 x 10-4 130 x 10-4 130 x 10-4 28 V/s >15000 M >30000 M 160 V; 1 minute 200 V; 1 minute 225 x 10-4 300 x 10-4 at 10 kHz at 100 kHz 2000 Feb 01 24 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 4.0 x 9.1 x 12.5 3.7 x 8.8 x 12.5 4.0 x 9.0 x 12.5 4.3 x 9.3 x 12.5 3.9 x 8.9 x 12.5 4.2 x 9.2 x 12.5 4.5 x 9.4 x 12.5 0.4 0.4 0.4 0.4 0.4 0.5 0.5 2222 369 25563 2222 369 25683 2222 369 25823 2222 369 25104 2222 369 25124 2222 369 25154 2222 369 25184 2222 369 25224 MKT 369 2000 Feb 01 25 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 369 GENERAL DATA MKT 369 PITCH 10 mm 296x12(full_width) l b seating plane (1) h 1.5 lt O1.3 (1) Hole 1.0 for dt = 0.6 mm. P Odt CBA072 Fig.14 Outline. Specific reference data for the 250 V DC capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: C 0.1 F Rated voltage pulse slope (dU/dt)R at 250 V (DC) R between leads, for C 0.33 F at 10 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 250 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 18.5 mm; note 2 C-tol 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 369 45... 2222 369 46... 2222 369 41... 2222 369 42... 2222 369 48... 2222 369 49... ORDERING on request on request on request on request on request on request 75 x 10-4 130 x 10-4 70 V/s >30000 M >30000 M 400 V; 1 minute 500 V; 1 minute 225 x 10-4 at 10 kHz at 100 kHz 2000 Feb 01 26 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 4.0 x 8.7 x 12.5 4.0 x 8.8 x 12.5 4.5 x 9.0 x 12.5 4.6 x 8.8 x 12.5 4.6 x 9.2 x 12.5 4.4 x 9.4 x 12.5 4.7 x 9.7 x 12.5 0.4 0.4 0.5 0.5 0.5 0.5 0.5 2222 369 45273 2222 369 45333 2222 369 45393 2222 369 45473 2222 369 45563 2222 369 45683 2222 369 45823 2222 369 45104 MKT 369 2000 Feb 01 27 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 369 GENERAL DATA MKT 369 PITCH 10 mm 296x12(full_width) l b seating plane (1) h 1.5 lt O1.3 (1) Hole 1.0 for dt = 0.6 mm. P Odt CBA072 Fig.15 Outline. Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: C 0.1 F Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 400 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 18.5 mm; note 2 C-tol 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 369 55... 2222 369 56... 2222 369 51... 2222 369 52... 2222 369 58... 2222 369 59... ORDERING on request on request on request on request on request on request 75 x 10-4 130 x 10-4 110 V/s >30000 M >30000 M 640 V; 1 minute 800 V; 1 minute 225 x 10-4 at 10 kHz at 100 kHz 2000 Feb 01 28 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 400 V; URac = 220 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 4.0 x 8.7 x 12.5 4.0 x 8.8 x 12.5 3.9 x 8.8 x 12.5 4.2 x 9.1 x 12.5 4.6 x 9.4 x 12.5 0.5 0.5 0.5 0.5 0.5 4.6 x 9.1 x 12.5 0.5 4.5 x 8.7 x 12.5 4.5 x 9.0 x 12.5 4.5 x 8.8 x 12.5 4.5 x 8.7 x 12.5 4.0 x 8.6 x 12.5 4.3 x 8.9 x 12.5 4.6 x 9.1 x 12.5 4.0 x 8.7 x 12.5 4.1 x 8.8 x 12.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 2222 369 55102 2222 369 55122 2222 369 55152 2222 369 55182 2222 369 55222 2222 369 55272 2222 369 55332 2222 369 55392 2222 369 55472 2222 369 55562 2222 369 55682 2222 369 55822 2222 369 55103 2222 369 55123 2222 369 55153 2222 369 55183 2222 369 55223 2222 369 55273 2222 369 55333 MKT 369 2000 Feb 01 29 BCcomponents Maintenance type www..com Metallized polyester film capacitors MKT 369 GENERAL DATA MKT 369 PITCH 10 mm 296x12(full_width) l b seating plane (1) h 1.5 lt O1.3 (1) Hole 1.0 for dt = 0.6 mm. P Odt CBA072 Fig.16 Outline. Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: C 0.1 F Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads, for C 0.33 F at 500 V; 1 minute RC between leads, for C > 0.33 F at 500 V; 1 minute R between interconnecting leads and casing; 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 630 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". H = 18.5 mm; note 2 C-tol 10% 5% 10% 5% 10% 5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 369 65... 2222 369 66... 2222 369 61... 2222 369 62... 2222 369 68... 2222 369 69... ORDERING on request on request on request on request on request on request 75 x 10-4 130 x 10-4 70 V/s >30000 M >10000 s >30000 M 1008 V; 1 minute 1260 V; 1 minute 225 x 10-4 at 10 kHz at 100 kHz 2000 Feb 01 30 BCcomponents Maintenance type www..com Metallized polyester film capacitors URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.01 0.012 0.015 0.018 0.022 4.1 x 8.7 x 12.5 4.4 x 8.9 x 12.5 4.9 x 9.2 x 12.5 5.3 x 9.5 x 12.5 5.9 x 9.9 x 12.5 0.4 0.5 0.5 0.6 0.7 2222 369 65103 2222 369 65123 2222 369 65153 2222 369 65183 2222 369 65223 MKT 369 2000 Feb 01 31 |
Price & Availability of 222236825335 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |